2. Online KNX Advanced Certification Course (English Edition) - KNX Live Platform

2. Online KNX Advanced Certification Course (English Edition)

€1350

The online KNX advanced course gives you 24/7 access to real KNX equipment. As a result, you can practise as much as you want, whenever you want.

What is the online KNX advanced course?

The online KNX advanced course is the next step after the KNX basic course. In other words, it takes your KNX knowledge to the next level and leads to the KNX Advanced certification.

Platform access

You get full access to the KNX Live Platform for 7 days (168 hours). All you need is a computer with a web browser. From there, you follow the lessons and book your theory and practice sessions.

Hands-on practice on real KNX equipment

During the practical sessions, you get remote access to a real KNX installation at our training centre. There, you:

  • first, program the devices with ETS
  • then, commission the devices and check the results
  • load and unload the individual address of each device
  • also, press the programming button and the push buttons of switches and actuators remotely
  • in addition, operate motion/presence detectors, weather stations, brightness sensors and magnetic contacts
  • finally, watch the status feedback LEDs

At the same time, a live camera shows every action at the installation in real time.

Official approval by the KNX Association

The KNX Association officially approves the theory and practice content of this course. As a result, you receive recognised training and your certification is valid worldwide. In other words, the online KNX advanced course gives you the knowledge the KNX Association requires for KNX Advanced certification.

What the online KNX advanced course covers

Couplers

First, you will learn how TP-TP couplers work, both old and new generation. You will also study the parameters of line couplers, area couplers and line repeaters. Next, you will cover routing, the telegram structure for downloading couplers and the filter table, automatic or manual. In addition, you will learn the TP-IP router, its individual address, network settings and parameters. Furthermore, you will use the IP router as a line, area or backbone coupler. Finally, you will see couplers for RF installations.

KNX and smart metering

Moreover, you will learn what smart meters, smart metering and smart grids are, and how to keep smart metering secure. Meanwhile, you will explore KNX applications such as sub-metering and load management. Finally, you will see how to integrate renewable energy: solar thermal, combined heat and power, and photovoltaics.

Flags

Also, you will learn how to set flags on several communication objects at once. For example, you will work with the Communication (C), Read (R), Write (W), Transmit (T), Update (U) and Initialisation (I) flags.

Interworking

In addition, you will learn the benefits and principles of KNX interworking. Then, you will study datapoint type coding, basic and structured types, and common KNX DPTs. Specifically, you will work with 8-bit values with and without sign, scaled and non-scaled, as well as DPT V8 (signed relative value). Furthermore, you will cover 2-octet values with and without sign, counters and floating point numbers. Finally, you will learn the DPTs for time, date, access control, scene control and HVAC.

IP communication

Meanwhile, you will learn the OSI model, TCP/IP, IPv4 and IPv6. You will also study IP communication in KNX, KNX IP device addressing and the KNX IP routing multicast address. Finally, you will cover the KNXnet/IP protocol, tunnelling and remote access to a KNX installation over the Internet.

KNX Secure

Moreover, you will learn KNX Secure as an extension of the KNX standard and its use cases. In addition, you will see KNX Secure in ETS: passwords, security keys, secure access and ETS reports.

Heating and cooling

Also, you will learn the requirements of a climate control system, the energy performance certificate and heating system design. Then, you will see how to integrate heating into the building management system. In addition, you will connect KNX to heating or cooling systems, directly or through a gateway. Finally, you will cover fan coils, air conditioning integration, ventilation and physical sensors such as weather stations, air quality and humidity sensors.

Lighting control

Furthermore, you will learn the principle of constant light control and the types of closed-loop controllers. You will also study functions, installation guidelines and control of several lighting rows with different daylight levels. Meanwhile, you will cover master/slave brightness control and combined closed-loop and open-loop control with dynamic offset. Finally, you will learn about DALI and how to calibrate closed-loop lighting control.

Logic functions

Next, you will learn logical links between communication objects and switch actuators (binary outputs) with logic functions. For example, you will work with OR and AND functions, with or without ON/OFF delay. You will also study extended logic functions, logic modules and graphic design in a logic diagram. In addition, you will build air conditioning control in a room with an AND function. Finally, you will cover compound elements such as NAND, NOR, equivalence and XOR.

Telegrams

Moreover, you will learn the TP telegram structure, timing requirements and acknowledgement. You will also study the control field, source address, destination address and checksum field.

Visualisation

Finally, you will learn about visualisation systems and the requirements for central control. Specifically, you will cover process points, static images, dynamic elements and status logging. You will also transfer data from the ETS project and access the bus through a hardware interface or a KNXnet/IP server. In addition, you will see how telegrams reach lines and areas, the filter table and the use of IP routers instead of line couplers. Furthermore, you will explore KNX devices with built-in visualisation, mobile apps and client/server solutions.

Practical training

As a result, you complete 10 exercises on the KNX Live Platform with real equipment:

  • staircase lighting timer with cancel button
  • 8-bit regulator to increase brightness on a dimmer
  • toggle and central OFF without double press
  • automatic blind operation
  • blinds with wind alarm
  • push-button scenes (scene module)
  • actuator scenes
  • heating with presence detector
  • fan coil control
  • conditional ON/OFF and automatic lighting

Exams and certification for the online KNX advanced course

After the course, you take a theory exam and a practical exam. To pass, you need at least 60% in each. As a result, you earn the KNX Advanced certification from the KNX Association.

Course details

  • Prerequisites: a passed KNX Basic exam
  • Duration: 30 hours
  • Training material: official KNX Association material
  • Passing score: 60% in each exam
  • Instructor: certified KNX Tutor
  • Certification: KNX Advanced, issued by the KNX Association

Not a KNX Partner yet? Start with the online KNX basic course.

Course Info

FREE DEMO

Try KNX Live for free

Request demo access and see how the platform works in practice.

9 free demo accesses available this week

Request free demo access